RCR311S_NA_IB_REVB_K4.qxd 7/27/04 11:41 AM Page 13
On-screen Menus
Accessing and Selecting Menu Items
Today’s advanced components use
To use a component’s
SAT•CBL VCR•DVD
TV
ON•OFF
MENU
(BLINK)
VOL & CH
1.Make sure your components are turned on and your TV is set to the component’s input. (Use the INPUT key to toggle through video sources when in TV mode.)
2.Press the component key whose menu you want to access.
3.Press the MENU key. The illuminated ON•OFF key blinks, indicating you are in the Menu Mode.
4. Use the VOL+/- and/or CH+/- keys to navigate through the
|
| 5. To make a selection from |
MENU | OK | the |
|
| the MENU or OK key to |
|
| select the highlighted item. |
!TIP: If the remote doesn’t respond, check to see that the illuminated ON•OFF key is still blinking. Note: it times out after 20 seconds. If this happens, just press the MENU key again, and then retry your selection.
Exiting a Menu Mode
The remote automatically times out of Menu Mode after 20 seconds of inactivity (no keys being pressed). At that time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the corresponding component key on the remote (TV, VCR•DVD, SAT•CBL). The illuminated ON•OFF key turns off.
Sleep Timer (Select Models Only)
This feature automatically turns off your TV at a duration you choose from 1 to 99 minutes. The Sleep Timer only works if you have found a code that controls your TV. The timing mechanism for the Sleep Timer is built into your universal remote control. To program the Sleep Timer, follow these steps.
TV
PROGRAMMING THE SLEEP TIMER
SLEEP
ON•OFF
ON•OFF
(BLINK)
1.Press and release the TV key.
2.Press and hold the SLEEP key for three seconds. The illuminated ON•OFF key turns on.
3.Release the SLEEP key.
4.Using the number keys, enter the desired time in minutes (from
13