RCA RCU450 manual Programming Sleep Feature

CODE

SEARCH

1 2 3

4 5 6

7 8 9

0

Note: For DVD or AUX, press DVD•AUX, then the component key corresponding to the component stored under the AUX key. For DVD, press DVD•AUX, then the VCR key. For an auxiliary component, press DVD•AUX, then the corresponding component key (TV, VCR, DBS•CABLE).

3.Press and release the CODE SEARCH key. The component key light turns off.

4.Starting with 0 on the keypad, press the number keys in order (0-9) until the component key light blinks.

Note: For DVD or AUX, press DVD•AUX, then the component key corresponding to the component to be stored under the AUX key. For DVD, press DVD•AUX, then the VCR key. For an auxiliary component, press DVD•AUX, then the corresponding component key (TV, VCR, DBS•CABLE).

5.The number that causes the component key light to blink is the first digit of your code.

6.Repeat step 4 until you have retrieved all three numbers of the code.

7.Refer to the code box to write down the code for your component within the Direct Entry Section (pages 5-8) for the component just programmed.

Sleep Feature

This feature will automatically turn off your TV at a duration you choose from 1 to 99 minutes.

SLEEP

1 2 3

4 5 6

7 8 9

0

SLEEP

OR

ON•OFF

PROGRAMMING SLEEP FEATURE

1.Press and hold the SLEEP key until the TV component key lights. Release the SLEEP key.

2.Enter time in minutes using the numerical key pad. The TV component key light turns off. (Minute 1 thru 9: press 0 before the actual number. Maximum: 99 minutes).

3.Leave remote aimed at television. (Sleep Feature will not work unless remote is left aimed at television.)

CANCELING THE SLEEP TIMER

The Sleep Timer program will be canceled and reset to zero by either of the following.

1.Press and hold the SLEEP key until the TV component key blinks.

2.Press the ON•OFF key, turning the TV off.

11