RCA RCU900 warranty Library Code Entry

RCU900_IB_revC.qxp 12/3/02 9:45 Page 8

Library Code Entry (continued)

To enter a code directly from the Code List, follow these steps:

1.Manually turn on the device to be controlled (TV, VCR, DVD, etc.).

2.Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds.

3.Release the SETUP key.

4.Press and release the LCD CODE key. The LED indicator light blinks

once to indicate acceptance of the keypress.

5.The touchscreen now shows the Device Setup Screen. Press and release the device key on the rubber keypad for the device whose code you want to enter (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress.

6.For AUX1 or AUX2, press and release the AUX device key, followed by the desired device key to be programmed under AUX (TV, VCR,

SAT/CBL, etc.).

7.The touchscreen now shows the Code Setup Screen. Find the three-digit code for your device brand from the Code List at the back of the manual. If your brand has more than one code listed, begin with the first code. Enter the three-digit code from the Code List. When a valid code from the list is entered, the LED indicator light blinks after the last digit is entered. For an invalid code, the LED indicator light flashes rapidly and beeps for two seconds before going off. In both cases, the touchscreen returns to the Main Setup Screen.

8.Before the code can be tested on the chosen device, you must exit back to normal operation by pressing the CLEAR key on the Main Setup Screen.

9.With the device on, aim the RCU900 at the device and press the ON•OFF or the CH+ key on the rubber keypad. If you have entered the correct number for your device, it will respond to the ON•OFF or CH+ key. If the device responds, no further programming is required.

10.If your device does not respond, try the next code in the list for your brand by repeating the procedure starting at step 2. If no other codes exist for your brand, try the Code Search or Code Autosearch methods.

8