TV or Audio Volume Punch-Through, Method

RCU900_IB_revC.qxp 12/3/02 9:45 Page 22

Method 1 (continued)

4.Press and release the numeric keys indicating the number of minutes (01-99) you wish to set on the Sleep Timer. The LED indicator light blinks once to indicate acceptance of the keypress and the screen returns to normal operation.

5.The Sleep Timer is now set.

6.When using the Sleep Timer feature, leave the remote pointing towards the TV with an unobstructed path.

Method 2 (From Setup Routine)

To set your Sleep Timer from the Setup routine, follow these steps:

1.Press the TV device key on the rubber keypad.

2.Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds.

3.Release the SETUP key.

4.Press and release the SLEEP key. The LED indicator light blinks once to indicate acceptance of the keypress.

5.The touchscreen now shows the Sleep Setup Screen. Press and release the numeric keys indicating the number of minutes (01-99) you wish to set on the Sleep Timer. The LED indicator light blinks once to indicate acceptance of the keypress and the screen returns to normal operation.

6.The Sleep Timer is now set.

7.When using the Sleep Timer feature, leave the remote pointing towards the TV with an unobstructed path.

Notes

•To cancel the Sleep Timer, press and release the ON•OFF key on the rubber keypad in TV Mode or press and hold the LCD SLEEP key in TV Screen 2 until the remote beeps twice. The LED indicator light blinks once to indicate acceptance of the keypress.

•The Sleep Timer settings are cleared when you enter Setup using the SETUP key on the rubber keypad. The Sleep Timer is also cleared when you enter the Macro Activation Screen.

•You can return to normal operation any time without setting the Sleep Timer by pressing the LCD CLEAR key.