RD1080
Advanced Operation
Advanced Operation
DSP
•In Music mode, press DSP button repeatedly to select among the DSP modes:
FLAT > BASS > POP
>
TONE > JAZZ > ROCK
•In TONE mode, you may further adjust BASS and TREBLE level.
Play modes
•In music mode, press MODE button repeatedly during playback for the fol- lowing playback modes:
Off (Normal playback) > Repeat One
>Repeat All > Shuffle > Repeat Shuffle > All Program > Repeat pro- gram > Normal.
Note: Plprogram and Repeat program only appears if there are programmed tracks.
Programming Tracks
1.Press ENTER in stop mode to enter program mode. You will see ‘P’ icon flashes on display, flashing ‘ -
list position.
2.Press 
or 
to select a track. Selected track number will flash.
3.Press ENTER key upward/downward to skip to the previous / next program- ming position.
4.Press ENTER to confirm selection.
5.Repeat steps
made.
6.Press STOP to exit programming mode or unit returns to stop mode automatically after 30 seconds if no keys are activated.
Note: The player will enter Intro Play mode and play the beginning of each track as you scroll through tracks for programming .
Editing program
Overwriting Programmed Tracks
1.In stop mode, press ENTER to enter programming mode.
2.Push 
or 
to select the pro- grammed track you want to overwrite.
3.Push 
or 
to select the new track you want to store.
4.Press ENTER to confirm selection.
5.Repeat steps 2 to 4 to overwrite addi- tional programmed tracks.
Key Lock
EN
To avoid accidental key activation, press and hold the MODE button to lock keys. “Locked” can be seen on display. press and hold the MODE button again to unlock keys.
File Download
This unit can be connected to the com- puter. Please see Software Instruction Manual for instructions to install USB driver , music management software and to transfer tracks to player and/or mem- ory card.
Adjust Volume Level
Press + or - to adjust sound volume. Refer to the volume level on display for sound level.
7
8
