TROUBLESHOOTING GUIDE
SYMPTOM | CAUSE (AND REMEDY | ) |
TV
Bad Picture (snow, multiple images distortion,blurry)
No sound.
• | Check the | location | of the | antenna and adjust it if necessary. | ||
• | Make sure | the | antenna cable is | connectedfirmly. | ||
• | Make sure | all | input | cables | are | connectedfirmly. |
•Increase the volume.
•Check whether the mute function has been activated on the Remote Control.
Black and White | • | Check the | PICTURE setting | within | the | PICTURE menu. | ||
picture. | • | Check to | make | sure the | program | you | are watching is broadcast | |
|
| in Color | and | not Black | & | White. |
|
|
No picture orsound.
Coloredpatches of picture.
Panel function key does not respond correctly.
• | Make sure | the | unit is | plugged in and onturned. |
• | Make sure | that | the ATV | modeselectedis . |
• | Try a new | channel to | check for possibletroublestation. | |
• | Make sure | the | antenna | is connected properly. |
•Increase the volume.
•Make sure the antenna or audio/video source device is working properly.
• | Make sure | all | cables are | firmlyconnected. | |
• | Check for | localinterference. |
| ||
• | Make sure | there are no unshielded electrical devices nearby | |||
| that | are | causinginterference. | ||
• | Turn | the TV | off forminutes,30 then try againit. | ||
•Under the influence of electrostaticphenomenon, the product may malfunction and requireusertopowerreset.
•Unplug and
The | displaymonitor's | • | LED TV takes | inside lightenphosphor. It may | increase the |
| ||
panel | goeshot. |
| temperature | of | the screen in occasionssome. It's | not defecta. |
| |
Unusual dots | • | Black | dots | and Bright points may appear | on scrtheenLED. | |||
|
|
| This | is a | structural property of the LED | panel and is not a defe | ||
Stripes on screen | • Adjust | the impulse phase may decrease | stripesRGB. in |
The top of the monitor• It may | occur | a defect. | |
gets hot . |
|
|
|
Unable to select a certain channel.
Disorder display at power on.
•The channel may be skipped. Choose this channel by directly selecting the buttons from the remote control.
• This may be caused because of avery short interval between POWER OFF and ON.
•Unplug the power and restart.
34
