RS2047EN 3/1/06 1:53 PM Page 16
CD & USB Playback
CD to USB Recording
EN mp3/WMA Playback Sequence
•Check that the mp3/WMA disc is created with a single folder structure. Refer to the diagram below for playback sequence details on
•For example, folders and songs from level 2 are played before moving on to play folders and songs from level 3.
You can record CD tracks / files to your USB device.
Recording CD to USB Device
EN
Note:
Only empty folders can be deleted.
LEVEL 1
A
Folder 1
LEVEL 2
D
Folder 1.1
E
LEVEL 3
8Song 1.1.1
9Song 1.1.2
10 Song 1.1.3
G
LEVEL 4
1.Connect a USB device to the USB connector at the front of the unit.
2.In CD mode, press CD REC to enter record mode. If CD playback is stopped, press CD REC, playback and recording will start automatically. If CD is already playing, recording starts at once. “REC” icon shows on the display in record mode.
3.Press CD REC or 
to stop recording.
Note:
After deleting the last file in a folder, the display shows ‘EMPTY’ and then goes back up one level in the folder tree and shows the current empty folder.
Deleting All Files on USB Device
B
Folder 2
C
Folder 3
Folder 1.2
F
Folder 2.1
3Song 2.2
4Song 2.3
5Song 2.4
6Song 3.1
7Song 3.2
Folder 1.2.1
11Song 2.1.1
12Song 2.1.2
13Song 1.2.1.1
14Song 1.2.1.2
15Song 1.2.1.3
Recording Selected Tracks on a CD to USB Device
1.Create a CD program by following instructions under “Setting Up Programs”.
2.In CD stop or navigation mode, press CD REC to enter record mode.
3.From stop mode, press PROG to enter program playback mode. Playback and recording starts automatically. The “PROG” and “REC” icons show on the display.
4.Press CD REC or 
to stop recording.
Note:
Recording stops automatically when CD stops (Example: end of disc is reached).
In navigation mode, press and hold DEL on the remote control (or DELETE on the main unit) to delete all files on the USB device.
Renaming Files on USB Device
1.Select a desired file using the navigation keys (refer to “Tracks and Files Navigation” for details).
2.Press PROG on the remote control.
3.Press 
(navigation keys) (or rotate - VOLUME+ on the main unit) to select
alphabets, press 
(or BACK or SELECT on the main unit) to move to the next alphabet. The alphabet being edited is flashing on the display.
1Song 4
2Song 5
Note:
•Folder playback sequence is indicated by the letters A to G.
•Song playback sequence is indicated by the numbers (1 to 15) in front of the song name.
4. Press PROG when finished.
Deleting a File from USB Device
1.Select the unwanted file using the navigation keys (refer to “Tracks and Files Navigation” for details)
2.Press DEL on the remote control (or DELETE on the main unit).
3.Select “YES” on the display by using 
(navigation keys) (or rotate
4.Press 
on the remote control (or SELECT on the main unit) to confirm.
10 |
|
|
| 11 |
|
|
|
|
|
