RTD206/207 EN 26/4/06 3:22 PM Page 5
Connections and Setup
Front panel controls
EN
OPEN/CLOSE - Open and close the disc tray.
SUBWOOFER - Toggle between different subwoofer output levels.
DISC SKIP – Goes to the next slot in the disc tray.
STOP - Stop disc playback.
PLAY/PAUSE - Start playing a disc. Pause.
SOURCE - Select the input source.
VOLUME - Adjusts the volume.
Surround sound light indicator - The LED lights when Surround mode is active.
ON/STANDBY - Switch the unit on and off.
USB Socket - Connects USB devices.
Connecting the Antennas
The AM and FM antennas connect to the AM and FM terminals on the system’s back panel.They must be hooked up in order to receive clear reception.
AM Loop Antenna and FM Indoor Antenna
FM 75Ω
White |
AM LOOP |
GND |
1. Uncoil the AM Antenna wire.
2. Press down on the Antenna tab to open the terminal
Note: Make sure the white wire on the AM lop antenna is inserted into 
the upper AM LOOP terminal.
Illustrations contained in this document are for representation only. | 3 |
