Operating Your Receiver
Switching on /off
• To switch on the receiver, press the ON/STANDBY but- | Selection of Audio/Video source | |
| ||
ton on the receiver once to enter standby mode. Press the | When one of the audio/video source is selected, the audio | |
SOURCE button on the receiver or one of the source but- | ||
and video input corresponding to the name will be | ||
tons or ON/OFF button on the remote control to power on | ||
activated. | ||
the receiver. | ||
|
EN
ON/STANDBY
5
D
ESSIVE | SOUND MODE | SOURCE |
N |
|
|
| VOLUME |
|
•Standby: when the receiver is on, press the ON/OFF on
the remote or the ON/STANDBY button on the receiver to return to standby mode.
NOTE
Your receiver has a
SOUND MODE | SOURCE |
VOLUME
The receiver acts as a switching device between all the sources that are plugged into it.
Example 1:
If you connect a VCR player to the VCR input (audio + video) on the receiver and press the SOURCE button until VCR shows on the display. You will be able to have the sound and image transmitted by the VCR.
SOUND MODE | SOURCE |
VOLUME
13