Advanced Sound Control
Stereo
The Stereo mode uses the two main channel outputs from the front speakers.
Fine Setting of the Components
The receiver can be directly turned on by pressing the SOURCE Buttons (like DVD/CD, SAT), which also selects the best surround sound mode. The default surround modes for different components are as tabled below.
If you decide to change the surround mode, you can press the AUDIO button repeatedly to toggle among the differ- ent surround mode choices and select the one you want.
For Digital Signal (2ch PCM), or analog signal , VCR,
Tuner, SAT: |
|
|
|
Dolby PL II Movie | Dolby PL II Music | Dolby PL | |
Emulation | 3 Stereo | Arena | Jazz Club |
Theater Stadium | Disco | Stereo |
|
For Digital Signal (Dolby Digital)
Dolby Digital 3 Stereo Stereo Dolby PL II
Movie Dolby PLII Music Dolby PL Emulation
For DTS Signal
DTS Stereo
Default Settings
The receiver will keep the last selection in memory as long as it doesn’t enter standby mode.
Input Signal Setting
The receiver defaults to the most convenient settings for your easiest use (see table).
Source/ |
|
|
Source/ | If PCM | If Analog Input |
Input | bitstream | selected |
DVD/CD | N/A | |
| MOVIE |
|
SAT | N/A | |
VCR | N/A | |
TUNER | N/A |
SOURCE | AVAILABLE INPUT |
SAT | ANL |
DVD/CD | |
VCR | ANL |
TUNER |
Analog Input
Select this setting to play analog signals from VCR or SAT.
DSP (Digital Sound Processor)
These digital sound effects resemble sounds in a real environment such as Arena, Jazz Club, Theater, Stadium and Disco. DSP automatically converts analog audio signals to digital ones which enables you to adjust the sound with- out degrading the sound quality. Different modes will give you different feels of size and types of listening environ- ment. (Not available in Dolby Digital and DTS)
Night Mode
By using Dynamic Range Compression technology, you can enjoy enhanced Dolby Digital sound quality at night with- out interrupting your roommates or neighbors. Night Mode will compress the volume difference between normal voices and sounds such as explosions, while still enjoying a Dolby Digital DVD experience. Night Mode can be activated by pressing the NIGHT button on the remote, DRC SOFT (Default) will appear on the display. While DRC SOFT
(Default) is still on the display, press the LEFT or RIGHT adjustment buttons,around the OK button, until you select the desired mode. There are three modes (OFF, SOFT, SOFT- ER) for you to choose the extents of compression.
SOURCE | DEFAULT INPUT (as seen on display) |
SAT | Analog (SAT/ CAB) |
VCR | Analog (VCR) |
TUNER | |
DVD/CD | |
|
|
NOTE
SAT and VCR are just generic names. You can connect other compatible audio/video components to these inputs like TV, TAPE, MINI DISC,
16