PROGRAMMING THE REMOTE
PROGRAMMING THE UNIVERSAL REMOTE TO CONTROL A LASERDISC PLAYER
You may be able to program your remote to control a laserdisc player. Use the codes shown to the right or on the sheet packed with your remote.
Follow these steps to program your universal remote to control your laserdisc player:
1.Turn on the laserdisc player.
2.Look up the brand and its code number(s) in the code list.
3.Press and hold the VCR2•LD button on the remote.
4.Enter the
5.Release the VCR2•LD button, then press POWER to see if the laserdisc player responds to the remote commands. If it doesn’t, try pressing VCR2•LD, then POWER again.
6.Repeat steps 3 through 5 using the next code listed for your brand until the laserdisc player responds to the remote commands.
LASERDISC PLAYER CODES
Pioneer | 033, 037 |
ProScan | 033, 037 |
RCA | 033, 037 |
This remote may not operate all models of the brands shown.
34