RCA RV3693 manual Programming The Remote, Programming The Aux Button On The Remote

PROGRAMMING THE REMOTE

PROGRAMMING THE AUX BUTTON ON THE REMOTE

You can program the AUX button on the remote to control another component. The AUX button can be used to control other brands of audio components, TVs, cable boxes, satellite receivers, and VCRs.

To program the AUX button, follow these steps:

1.Turn on the component you want to program.

2.Look up the brand and corresponding code number(s) in one of the code list on the previous pages.

3.Press and hold the AUX button on the remote. Then, press the other component button—AM/FM, TAPE, CD, DSS•CABLE, etc.

4.Release the component button, but not the AUX button.

5.Enter the three-digit code from the code list.

6.Release the AUX button, then press POWER or CHAN UP or DOWN to see if the component responds to the remote commands. If it doesn’t, press AUX, then POWER again.

7.Repeat steps 3 through 6 using the next code listed for the brand of your component until the component responds to the remote commands.

36