PROGRAMMING THE REMOTE
PROGRAMMING THE UNIVERSAL REMOTE TO
CONTROL A CABLE BOX
Refer to the cable box connection page or contact your cable company to hook up your cable box. You may be able to program the remote for your remote controllable cable box. Use the codes in the code list on the right or on the sheet packed with your remote.
1.Turn on the cable box.
2.Look up the cable box brand and its code number(s) in the code list on the next page or on the code sheet packed with the remote.
3.Press and hold the DSS•CABLE button on the remote.
4.Enter the
5.Release the DSS•CABLE button, then press POWER or CHAN UP or DOWN to see if the cable box responds to the remote commands. If not, try pressing DSS•CABLE, then POWER again to see if the cable box responds.
6.Repeat steps 3 through 5 using the next code listed for the brand of your cable box until the cable box responds to the remote commands.
This remote may not operate all models of the brands shown.
32