Cabletron Systems Ethernet Hubs manual 9030367 E7 Event and Alarm Messages, 00010401

	Cabletron Ethernet Hub Alarms and Events
Table 7-1.	Events and Alarms (Continued)
	Event Message	Probable Cause Message
	00010401	00010401
	Device {v} of type {v} is	DUPLICATE IP ADDRESS
	created with an IP address
	already used by another model.	The model has the same IP
		address as that of some other
		Model.
	00010402	00010402
	Device {v} of type {v} is	DUPLICATE PHYSICAL ADDRESS
	created with a physical (Mac)
	address already used by another	The model has the same Physical
	model.	address (Mac address) as that of
		some other model.
	00010601	00010601
	Port {v} (Instance ID {v}) on	A port has changed from
	board in slot {v} (Instance ID	operational to segmented.
	{v}) of {v} (name - {v}) has
	segmented.
	00010602	00010602
	Port {v} (Instance ID {v}) on	Not Applicable.
	board in slot {v} (Instance ID
	{v}) of {v} (name - {v}) is no
	longer segmented.
	00010603	00010603
	Network configuration change	Not Applicable.
	reported by {v} (name - {v}).
	MAU attached to port {v}
	(Instance ID {v}) on board in
	slot {v} (Instance ID {v}).
	00010604	00010604
	Network configuration change	A previously attached MAU has
	reported by {v} (name - {v}).	been removed or powered down.
	MAU previously attached to port	This trap should only occur for
	{v} (Instance ID {v}) on board	MIMs that support link state.
	in slot {v} (Instance ID {v})
	has been removed or powered
	down.
	00010605	00010605
	New source address {X 5}	Not Applicable.
	(Instance ID {0 6}) detected by
	{t} (name - {m}) on port {I 3}
	(Instance ID {0 4}) of board in
	slot {I 1} (Instance ID {0 2}).

9030367 E7	Event and Alarm Messages
	7-3