Ethernet Hubs Device View Description

Figure 2-1. Accessing the Device View

Double-click

Close

Navigate

Alarms

Performance

Notes...

Utilities

Zoom

Configuration

Diagnostic

Acknowledge

Flash Green Enabled

Application

Device

DevTop

 

 

Select Logical or Physical

Logical

 

 

 

Physical

 

 

 

 

 

 

 

 

 

Ethernet Hubs Device View Description

The Device View for a hub allows you to view a logical or physical representation of the Media Interface Modules (MIMs) installed in a hub. The logical MIM representation shows a port status label and a logical gauge, while the physical MIM representation shows the actual physical appearance of the module and its LEDs. The Device View also provides you with menu bar access to the views that monitor and control the hub, the hub modules and each module port.

The Device View shows an actual representation of the hub configuration. The representation is updated after each SPECTRUM polling cycle to show any changes in the hub configuration. For example, if a module is pulled from or added to the hub, the device view displays the new configuration. Figure displays one example of a Cabletron Ethernet Hub Device View.

Device Views

Cabletron Ethernet Hubs

2-2

Management Module Guide

Page 21
Image 21
Cabletron Systems manual Ethernet Hubs Device View Description, Select Logical or Physical