Cabletron Ethernet Hub Alarms and Events
Event and Alarm Messages Cabletron Ethernet Hubs
7-6 Management Module Guide00010613
Error threshold exceeded. An
error threshold, {v}% of good
packets in {v} seconds, has
exceeded on port {v} (Instance
ID {v}) of board in slot {v}
(Instance ID {v}) of {v} (name -
{v}).
00010613
This trap will be generated when
packets of the selected error
type exceeds a threshold
percentage of the good packets
for a particular interval for a
particular port.
00010614
Collision threshold exceeded.
Collisions exceeded {v}% of good
packets in {v} seconds on port
{v} (Instance ID {v}) of board
in slot {v} (Instance ID {v}) of
{v} (name - {v}).
00010614
This trap will be generated when
collisions exceed a threshold
percentage of the good packets
for a particular interval for a
particular port.
00010615
Port type changed. Port {v}
(Instance ID {v}) on board in
slot {v} (Instance ID {v}) of
{v} (name - {v}) is now type {v}
(Instance ID {v}).
00010615
A port has been changed from a
station port to a link port, or
vice versa.
00010616
Address lock changed for {v}
(name - {v}). New lock status is
{v} (1 = Off / 2 = On).
00010616
The status of the address lock
has been changed.
00010617
Port security violation occurred
on port {v} (Instance ID {v}) on
board in slot {v} (Instance ID
{v}) of {v} (name - {v}).
Violating address is {v}.
00010617
A source address other than
those locked to a port has been
seen.
00010618
Port violation reset. Port {v}
(Instance ID {v}) on board in
slot {v} (Instance ID {v}) of
{v} (name - {v}) has been reset.
00010618
Management intervention has
reset a port after a violation
has occurred.
00010619
Environment Temperature Warm
detected by {v} (name - {v}).
00010619
This device detects that the
temperature within the device
has reached a WARM condition.
Table 7-1. Events and Alarms (Continued)
Event Message Probable Cause Message