Configuration View Description

Source Address View

Flash Download

This button allows you to access the Flash DownLoad View. This button is available only in the IRM3, MRXI, and MiniMMAC Configuration Views.

Additional Configuration

This button allows you to access an additional configuration view, which is described later in this chapter. This button is available only in the IRM2 and IRM3 Configuration Views.

Community Table

This button allows you to access the Community and Trap Table View, which is described later in this chapter. This button is available only in the IRM2 and IRM3 Configuration Views.

Source Address View

You can access the Source Address View by clicking on the Find Source Address button in the Configuration View. This view gives you the ability to trace a MAC address to the board and port where the address is detected, and provides the following information. This view is not available for IRM or the MRXI hubs.

Model Name

The user-defined or default name of the model.

Network Address

The network IP address (e.g., 132.177.118.24).

Source Address

User-defined MAC address using the format xx.xx.xx.xx.xx.xx.

Find Board/Port

This button allows you to access the Source Address Board/Port Location View. Figure 4-1provides the information contained in the view.

Configuration Views

Cabletron Ethernet Hubs

4-6

Management Module Guide

Page 63
Image 63
Cabletron Systems Ethernet Hubs manual Source Address View