Cabletron Systems Ethernet Hubs manual Haspart Panel, Snmp System Group View, Snmp UDP Group View

Application View Description

HASPART Panel

UPS

This button, available only in the IRM3 Application View, provides access to the Uninterruptible Power Supply (UPS) Statistics View. This view is described later in this chapter.

HASPART Panel

The HASPART Panel allows you to access Performance Views for the modules installed in the hub. You can either double-click on the name of the module in the HASPART panel, or you can highlight the name and click on OK. The Performance View for modules is described in Chapter 6.

SNMP System Group View

You can access the SNMP System Group View by clicking on the System button in the Application View. The SNMP System Group View provides the following information:

System Descriptor

A textual description of the hub. This description includes the name of the hardware type and the networking software.

System Up Time

The time since the hub network management software was last reinitialized, displayed in the following format: days+hours:minutes:seconds

System Object Id

The Structure of Management Information (SMI) identification of the network management subsystem contained in the hub.

SNMP UDP Group View

You can access the SNMP UDP Group View by clicking on the UDP button in the Application View. The SNMP UDP Group View provides the following information:

In DataGrams

The total number of UDP datagrams delivered to UDP users.

Out DataGrams

The total number of UDP datagrams sent from this entity.

In Errors

The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.

Application Views	Cabletron Ethernet Hubs
3-4	Management Module Guide