9030367 E7 Performance Views
6-11
Port Performance View

HASPART Panel

The HASPART Panel allows you to access Port Performance Views for the
modules installed in the hub. You can either double-click on the name of the
module in the HASPART Panel, or you can highlight the name and click on
OK. The Port Performance View for modules is described in the next section.
Port Performance View
The Cabletron hub Port Performance View provides the following navigational
features:
• Buttons allow you to access increasingly detailed views of network
information.
• Table entries within views provide double-click zones which navigate you
to device-specific Information Views.
You can display Port Performance Views from the DevTop View or the Device
View.

Device View Access Method

There are three ways to access the Port Performance View from the Device
View. To display a Port Performance View from the Device View, follow these
steps:
1. Click on an individual port in the Logical MIM Representation with
the right mouse button to display the pop-up menu.
Slot Number The number of the hub slot that contains the MIM.
Traffic Alarms Enables the sending of device-level traffic traps.
Traffic Threshold The threshold of packets within the Time Base that
will cause a traffic alarm.
Collisions Alarms Enables the sending of device-level collision
alarms.
Collisions Threshold The number of collisions per good packet measured
by the device that will generate an alarm. Values
can be 1 to 15.
Table 6-6. SIRM and MRXI MIM Configure Alarms View Fields (Continued)
Field Description