Cabletron Systems Ethernet Hubs manual Event and Alarm Messages

Chapter 7

Event and Alarm Messages

What is in this Chapter

This chapter describes the events and alarms that the Cabletron Ethernet Hubs Management Module supports. It also notes if an event is mapped to an identical alarm message, and if it provides any corresponding probable cause message.

Events and alarms originate as generic Simple Network Management Protocol (SNMP) traps sent from the physical hub devices. These traps, or unsolicited messages, are translated as SPECTRUM events and displayed in the Event Log. For more information on specific SNMP traps, refer to RFC 1213 available through the Internet system. Also refer to the Management Information Base (MIB) documentation for each specific hub device.

NOTE

Each event/alarm listed below includes: the event code, the event/alarm message, followed by a brief description of the event/alarm, an alarm mapping indicator, and any probable cause message for the mapped alarm. When variable data is inserted in a message, it is indicated by a {v}. Data in braces will be replaced by the named variable followed by a specific value, without the braces.

9030367 E7

7-1