9030367 E7 Device Views
2-13
Logical MIM Representation
Gauge Control Panel
Gauge Control Panel
The Gauge Control Panel allows you to change the type of statistical
information presented in the Port Performance label of the Logical MIM
Representation. To access the Gauge Control Panel, single-click on the right-
most module in the hub chassis to highlight it and then select Gauge Control
Panel from the Icon Subviews menu.

Selected Attribute

This area of the Gauge Control Panel allows you to select the statistical
attribute displayed on the Logical Interface Icon’s Gauge. The label changes
color to reflect the attribute selected. Refer to Table 4-1 for a list of the
attribute definitions.

Gauge Mode

This area of the Gauge Control Panel allows you to select the mode presented
by the Logical Gauge. Possible selections are Totals, Rates, or Percentages.
The Percentages selection represents the percentage of the interface compared
to the rest of the interfaces, and is not currently supported. Once you select
these attributes, click the Gauge Control Panel Apply button to activate the
mode represented in the Logical Gauge Label (f).

Gauge Type

This option allows you to select either a numeric or linear representation of
the Logical Gauge.