Cabletron Systems Ethernet Hubs Port Source Address View, Cabletron Hub LEDs, Network Address

Port Source Address View

Port Source Address View

The Port Source Address View is available from the IRBM, IRM2, IRM3, and MiniMMAC Device Views. This view allows you to display the Source Address information for the port. To open the Port Source Address View, follow these steps:

1.Click on the port icon with the right mouse button to display the port Icon Subviews menu.

2.Select Port Source Address View from the this menu.

You can also display the Port Source Address View as follows:

1.Click on the port icon to highlight it.

2.Select Icon Subviews from the View menu.

3.Select Port Source Address View from the Icon Subviews menu. The Port Source Address View displays the following information:

Name

The user-defined or default name for the hub.

Network Address

The IP address of the hub.

Device Type

The SPECTRUM model type name of the hub.

Slot/Port Number

The slot number and the port number in this format: 1.1 (Slot number 1, Port number 1).

Source Address Table

The list of Source Addresses for the port. The print button allows you to print out a copy of the table to a printer or a file.

Cabletron Hub LEDs

This section describes the LEDs available on Cabletron Systems intelligent modules for the MMAC hub chassis types and the LEDs available on the front panel of the MRXI and MiniMMAC. You can see these LEDs in the Physical Representation of the Device View. For more specific information on LEDs, refer to the corresponding Cabletron hardware installation manual.

Device Views	Cabletron Ethernet Hubs
2-18	Management Module Guide