MIM Performance View
IRBM, IRM2, IRM3 and MiniMMAC Hubs
Performance Views Cabletron Ethernet Hubs
6-8 Management Module Guide
This button allows you to toggle how the multi-attribute line graph is
displayed. You can display the network statistics in Logarithmic or Linear
format.
This button, not available for the IRM3, displays the same Detail view as
described earlieer in this chapter. Refer to that section for information on this
view.
This button, available only for the IRM3, provides the same information as
the Detail button for IRM2, IRBM, and MiniMMAC hubs.
This button, available only for the IRM3, displays two pie charts. The Frame
Size pie chart shows the total number of frames, grouped according to their
size in bytes. The Protocol pie chart shows the number of frames per protocol
type.
This button allows you to view historical data related to module performance.
For example, if you set a date and time for two days ago, you can view module
performance statistics for two days ago.
This button lets you change how time is measured on the line graph in the
MIM Performance View. You can choose to display statistics in time blocks
ranging from 1 to 100 hours.
This button opens the MIM Configuration View. This view allows you to
configure the module information. Table 6-1 provides definitions of the fields
contained in the MIM Configuration View. This view also has one button. The
Config Alarms button allows you to access the MIM Configure Alarms View,
Log/Lin
Detail
Errors
Frames
Scroll to Date-Time
Change Time Scale
MIM Configuration