Configuration View Description

Redundancy View

Test Redundant Circuits

This button allows you to test the redundant circuit.

Test Time of Day

The time of day at which the redundant circuits should be tested. This field is not available in the MRXI Redundancy View.

Redundancy Table

This button allows you to display the MMAC Redundancy Table. The Redundancy Table allows you to set up redundant circuit connections between any two or more hubs that have redundant capability in their firmware. For more information on setting up redundant circuits, refer to Hub Redundancy Management in this chapter.

You can double-click on any of the circuit names in the Redundancy Table to access the MMAC Redundancy Information View. This view lets you set up redundancy circuits. Table 4-3provides the information contained in the view.

Table 4-3.

MMAC Redundancy Information View Fields

 

 

 

 

Field

Definition

 

 

 

 

Circuit Name

The name of the indicated circuit.

 

 

 

 

Retry Count

The number of unanswered polls allowed for the

 

 

indicated circuit before the current connection is

 

 

declared bad.

 

 

 

 

Bd/Port Combination

The number of board/port combinations associated

 

 

with the indicated circuit.

 

 

 

 

MAC Address Add

Adds the Ethernet address to the polling list for the

 

(IRM2, MRXI,

indicated circuit.

 

MiniMMAC)

 

 

 

 

 

IP Address Add (IRM3)

Adds the IP address to the polling list for the indicated

 

 

circuit.

 

 

 

 

Number of Addresses

The number of addresses associated with the indicated

 

 

circuit.

 

 

 

 

Circuit Enable

Enables or disables the indicated circuit.

 

 

 

 

Circuit Number

The number from the circuit names in the Redundancy

 

 

table (e.g., Circuit 04).

 

 

 

 

Board Port Instance

The board number and port number that the

 

 

redundant circuit is connected to. For example, 3.6 is

 

 

board 3, port 6.

 

 

 

 

Port Circuit Status

The current state of this port in the redundant circuit.

 

 

 

 

Port Circuit Type

The type of port this port is in the redundant circuit.

 

 

 

Configuration Views

Cabletron Ethernet Hubs

4-12

Management Module Guide

Page 69
Image 69
Cabletron Systems Ethernet Hubs manual Test Redundant Circuits, Test Time of Day, Redundancy Table