MIM Performance View
SIRM and MRXI Hubs
Performance Views Cabletron Ethernet Hubs
6-6 Management Module Guide

SIRM and MRXI Hubs

The Performance View for the SIRM and the MRXI hubs provides the
following information:
Model Name
The user-defined or default name of the model.
Device Name
The ASCII name of the device read from the device.
Network Address
The network IP address (e.g., 132.177.118.24).
The Performance View also displays a bar gauge at the bottom of the view. The
right box (green number) and the bar gauge show the number of packets since
the last poll. The left box (white number) shows the number of packets
measured since the hub was powered up.
In addition, the Performance View provides a Packets Per Poll button. The
Packets Per Poll button displays a graph showing the rate of packets
counted per poll. The graph that appears has a scroll bar that lets you view
the recent hub performance statistics. The bottom axis of the graph shows the
time in seconds broken into 5 minute intervals. The right axis shows the rate
of packets received during the last polling interval.
There is also a small box on the graph that shows the rate of packets received
during the last polling interval. You can scroll to a particular date and time to
view past hub performance statistics. A Set Date-Time (SDT) button is
provided in the lower-right corner for setting a specific date and time for
which you want to view statistics.
MIM Performance View
You can access non-intelligent and third-party-intelligent MIM Performance
Views through the following views: The hub Device View, or the HASPART
Panel in the hub Application View. You can also refer to the management
module guide for any third-party modules installed in the hub. To open the
MIM Performance View from the Device View, follow these steps:
1. Click on the module to highlight it.
2. Select Icon Subviews from the View menu.
3. Select Module Performance from the Icon Subviews menu.