Configuration View Description
Configure Alarms View
Configuration Views Cabletron Ethernet Hubs
4-10 Management Module Guide
Error Threshold
The threshold value within the alarm timebase which, once the percentage of
errors per good packet is exceeded, generates an error alarm. This field is not
available in the MRXI Configure Alarms View.
This button allows you to Enable or Disable detection of Broadcast Alarms.
This button is available only in the IRM2 and IRM3 Configure Alarms Views.
Broadcast Threshold
The threshold value within the alarm timebase which, once that number of
broadcasts received is exceeded, generates a broadcast alarm. This field is
available only in the IRM2 and IRM3 Configure Alarms Views.
Time Base
The number of seconds used as the interval for performing all of the rate
alarm checks. The minimum is 10 seconds. For example, if the time base is 10
seconds, an alarm will occur only when the specified number of errors occurs
within 10 seconds.
This button allows you to Enable or Disable the audible alarm in the hub. You
must have a community name with Read/Write permission to update this
feature. This button is available only in the IRM2 and IRM3 Configure Alarms
Views.
This button permits a management station to turn off a sounding alarm.
Attempting to change this button to the ON position may result in a write
failure error. You must have a community name with Read/Write permission
to update this feature. This button is available only in the IRM2 and IRM3
Configure Alarms Views.
Broadcast Alarms
Audible Alarm
Sound Audible Alarm