Cabletron Systems Ethernet Hubs manual Changing MIM Representations, FLT Fault

Changing MIM Representations

COLLISION

This LED indicates that the MiniMMAC has detected a collision on one of its ports.

FLT (Fault)

This LED is located on the back of the MiniMMAC. It indicates that an error has been detected by the MiniMMAC’s software.

XMT (Transmit)

This LED is located on the back of the MiniMMAC. It indicates that the hub is transmitting packets to the segment connected to it.

Changing MIM Representations

You can change the MIM representation of the entire hub or the MIM representation of selected modules in the hub. The following sections describe several methods for changing MIM representations.

Changing MIM Representations on the Entire Hub

To change the representation of the entire hub Device View, follow these steps:

1.Within the hub Device View, pull down the Device Menu.

2.Click on either the Display Physical MIMs or Display Logical MIMs menu option. The appearance of the hub changes to the selected MIM representation.

Changing MIM Representations on a Single Module Using the Menu Bar

To change the representation of a single module using the menu bar, follow these steps:

1.From the Physical representation of the Device View, move the mouse pointer onto the module. Single-click the left mouse button.

2.Select the Icon Subviews from the View menu.

3.Select the Go Logical menu option. The selected module changes its appearance and appears to extend from the hub chassis.

9030367 E7	Device Views
	2-23