Log Messages
The Syslog log messages are classified into the following 5 categories. Classification details are
dealt with in the UNIX syslog.
Classification | Level | Fault Severity |
crit | Error | Critical fault at the software level (stops task operation) |
|
|
|
err | Error | Fault involving a malfunction (operation interrupted) |
|
|
|
warning | Warning | Fault not involving malfunction |
|
|
|
notice | Warning | Fault outside the system |
|
|
|
info | Information | Information on correct operation |
|
|
|
Camera Server-related Log Messages
●A001 Camera server startup failure (crit)
Message | no %1 installed |
|
|
%1 | sources protocols |
|
|
Explanation | Capture and initialization of protocols has failed, and the camera server |
| has failed to start. |
|
|
Response | If rebooting does not solve this problem, there is a malfunction. Contact an |
| authorized Canon service representative. |
|
|
●A002 Protocol initialization failure (err) | |
|
|
Message | %1 protocol not installed |
|
|
%1 | Protocol type (LS/C LS/D LS/H) |
|
|
Explanation | Initialization of WebView has failed. The setting information may be corrupted. |
|
|
Response | Correct the settings or return to |
|
|
●A007 View restriction setting error (warning)
Message | inconsistent view restriction for camera[1] |
|
|
Explanation | The view restriction settings are corrupted. The camera control functions |
| on the affected camera cannot be used. |
|
|
Response | Restore the factory default settings or reset the view restrictions. |
|
|
