Preset Setting Tool
Retrieving Values from the Camera Zoom Position of the Admin
Viewer and Changing Settings
Start up Admin Viewer and set the camera zoom position as a preset.
To Make Settings...
1.From the Preset Selection box, select the preset to be set, and enter the “Preset Name”.
2. Click the “Admin Viewer” button to start it up.
3.Click the “Start Control” button in the Admin Viewer to obtain camera control rights for the camera.
4.Move the camera zoom position to the position you want to set preset camera zoom position, then click the “Get Value” button.
The values retrieved using the Get Value button can be checked in the Preset settings input boxes, or with the Preset Preview frame.
At this point, you can also enter and set values in the camera parameters.
5. Click the “Apply” button.
Check the Status List to be sure the values were applied correctly. Then when the Save Settings button is clicked, the values will be saved to the
VB Administration Tools
