Using VBCollector
r“Apply” button
Saves a change to the reception port number in the registry. If you make a change, a dialog box is displayed. Click “Yes” and the transmission port of each server is also changed.
t“Server Setting” button
Displays a dialog box with information about the selected server for editing (→
y“Notification Settings” button
For performing notification settings for the selected server.
3.Click the “Notification Settings” button to set a value for available space for the server to give a low server capacity notification.
q“Send notification when server space gets low”
Select to send a low server capacity notification when available space on the server is insufficient.
w“Available disk space of the server”
Set a value for available space at which the server will send a low server capacity notification.
When available space on the server falls below the value set, a low server capacity notification is sent.
q
w
Tip
● Where “Host” is displayed as “(Other)” or where the transmission port and the reception port are different, you cannot receive a low server capacity notification.
●
●If “Host” is not “(Other)” or “Port” is not “Reception Port No.” in the selected server, a message asking you to confirm whether it is okay to change the setting values will be displayed. Click the “Yes” button and a dialog box appears.
●If the server that sends the notification is in the middle of a task, there is no automatic downloading during normal tasks.
●If there is a setting value for the maximum number of downloaded images, only the specified number will be downloaded.
●Images on the server are deleted regardless of the setting for deletion of the images on the server.
●When large images are recorded each second, the server will run out of capacity before it can send a notification, and picture recording may stop working.
●When the server capacity falls below the set value, a notification will be sent from the server every 30 seconds.
