Admin Viewer
Operating a Camera
The Admin Viewer provides camera control methods not available in the Viewer for PC or Viewer for Java.
Advanced Camera Control
In the dialog box, you can set the focus and speed, and control the zoom by pressing the respective button to start and releasing the button to stop.
To Make Settings...
1. Click the “Advanced camera control” button on the toolbars.
2. The Advanced Camera Control box appears.
qPan & Tilt/Home buttons
Pan and Tilt movements occur in the direction of the arrows on the buttons. Operation occurs when the button is held down and stops when it is released. The center button is the Home button which, when clicked, returns the camera to its home position.
*Not available with the
w “AF/MF” button |
|
Displays a dialog box for switching between Auto Focus | q |
and Manual Focus. |
|
Auto: Auto focus. |
|
| VB |
w | Administration |
e |
|
r | Tools |
|
Auto (for domes): For the camera used in combination with a camera dome so that auto focus does not focus on the camera dome wall surface.
Fixed at infinity: Enables focusing on infinity.
Manual: Hold Down the Far or Near buttons to adjust the focus.
e“Speed” button
Displays a dialog box for camera operation speed.
Pan/tilt speed: Select a pan and tilt speed from Fast, Normal or Slow.
Zoom speed: Select a zoom speed from Fast or Slow.
Focus speed: Only available with the
*With the
r“Zoom” button
Lets you zoom in or zoom out. Zoom occurs when the button is held down and stops when it is released.
