Schedule Setting Tool
Setting Up Night Mode
To Make Settings...
1.With the Schedule Setting Tool, open the Night Mode Setting Tool.
In the Service tab of the Schedule Setting screen for a Normal or Special Schedule, check Night Mode, select a setting number and click the “Detail” button (→
“Night mode setting tool” button on the toolbar.
If you have opened the Night Mode Tool from the toolbar, select a setting number from the setting number selection box in the Night Mode Setting screen.
2.Check Cancel Infrared Cut Filter.
For setting slow shutter.
3.Click the “Save Settings” button to save the settings and close the Night Mode Setting screen.
● If you have selected “Enable Slow Shutter”, exposure will be manual, and aperture
VB Administration
Note
and gain will be at maximum.
Change the shutter speed and adjust brightness according to your operating environment and photographic subject.
●If you specify a shutter speed of 1/30 seconds or slower for NTSC, or 1/25 seconds or slower for PAL, auto focus will not operate.
Tools
Tip
In Night Mode, focusing with Auto Focus may be difficult or may appear to be out of focus.
