![](/images/new-backgrounds/1054274/5427485x1.webp)
Setting Up the Administrator Password and Ethernet etc. (System and Network)
You can perform the following settings with System and Network.
●Root Account: For setting up passwords.
●Ethernet: For setting up IP addresses and other settings necessary for connection to the network.
●Connection Keeping: For setting up the function whereby packets are periodically transmitted and there is automatic
When you have made changes to the settings, click the “OK” button to return to the Settings Title Page. If you do not make any changes, click the “Cancel” button.
Root Account
1
2
1“Password”
Sets the password. Up to 8 ASCII characters can be used (spaces or printable characters). The default setting is
2“Confirm Password”
Confirms the password in the field above.
Basic Settings
Note
● For reasons of system security, You must change the administrator password. However, be sure to remember the password (→
●If you have forgotten the password, press the Reset switch and restore the factory default settings (→
factory default settings.