Canon Vb-C50fi Apply the view restriction, Apply button, Preview button, 0Admin Viewer button

View Restriction Tool

tCamera Selection box

Select the camera to be used to apply view restriction settings.

y“Apply the view restriction”

View restriction settings are applied when this item is selected.

uView Restriction Value Input boxes and “Get Value” button

The view restriction settings can be edited by entering values in the View Restriction Value Input boxes. When the “Get Value” button is clicked, the current angle of the camera can be

retrieved and reflected in each setting value listed below.

•View restriction setting values

Upper value ......... Value for the upper limit of the view restriction. The upper value of the

	selected camera angle is obtained using the “Get Value” button.
Lower value	Value for the lower limit of the view restriction. The lower value of the
	selected camera angle is obtained using the “Get Value” button.
Left value	Value for the left limit of the view restriction. The left value of the selected
	camera angle is obtained using the “Get Value” button.
Right value	Value for the right limit of the view restriction. The right value of the selected
	camera angle is obtained using the “Get Value” button.
Telephoto	Value for the telephoto limit of the view restriction. The zoom value of the
	selected camera angle is obtained using the “Get Value” button.
Wide-angle	Value for the wide-angle limit of the view restriction. The zoom value of
	the selected camera angle is obtained using the “Get Value” button.

*Upper value, Lower value, Left value and Right value cannot be set with the VB-C50Fi.

i “Apply” button

Applies the current view restriction settings to the VB-C50Fi. At this stage, the edited settings are not yet saved to the VB-C50Fi. Be sure to click the “Save Setting” button to save the settings to the VB-C50Fi.

o“Preview” button

Clicking this button allows checking of the set values specified in the View Restriction Value Input boxes with the View Restriction Preview frame.

!0“Admin Viewer” button

This button can be used to start up Admin Viewer.

!1Status List

Displays the results of communication between this tool and the VB-C50Fi. Warning messages are displayed in blue and error messages are displayed in red.

● You cannot set view restriction for an external camera. For this reason, the only

VB Administration Tools

Note

camera you can select in the Camera Selection box is “Camera 1” (VB-C50Fi).

●Edited content is not saved to the VB-C50Fi when the “Apply” button is clicked. The edited content will only come into effect when the “Save Setting” button is clicked.

4-9