![](/images/new-backgrounds/1054274/54274217x1.webp)
Schedule Setting Tool
7.Check motion detection status in the server.
To confirm the operating level of motion detection with the settings you have made, check “Display Motion Detection Status of the Server”. Motion detection status is displayed as the icon below.
[Detection disabled]
[Detected]
[Not detected]
● Normally, the Motion Detection Tool simulates in your PC the operation of the VB-
Note
C50Fi’s motion detection module. Therefore, depending on the processing capability
of your PC and status of the network between the
VB
●When the
●The motion detection settings should be adjusted and set in conditions that are as close as possible to those for actual operation.
Administration T ools
Tip
● The motion detection status of the server display may not match the “Motion detected (peak display)” in this tool.
●When “Display motion detection status of the server” option is selected, external device and log output, and picture recording are not performed.
●Because the Motion Detection Function detects motion by comparing consecutive image frames, small movements are less likely to be detected when the video quality is poor.
●For detailed information on specifying the settings, see Page
8.Click the “Save Settings” button in the Schedule Setting screen to save the settings, and close the Motion Detection Setting screen.
This completes the settings for motion detection.