Using VBCollector
Displaying Logs According to Selection Criteria
Logs can be filtered according to error type, code, or date and time etc. so that only the required information is displayed.
To Make Settings...
1. Choose “Filter” from the “View” menu bar.
2. The Filter dialog box appears.
To display only the logs that match the specified
q
criteria, enter the criteria below and click the “OK”
w button. If no changes are required, click the “Cancel” e
button.
qSpecify Task
Select if filtering by task name, then enter the task r name.
wSpecify Server
Select if filtering by server name, then enter the server name.
eError Type
Specify the error type when filtering by error type.
“Not Specified”
Selecting this item disables priority and code settings.
“Specify Priority”
From Error, Warning, or Information, select the error level to be displayed.
“Specify Code”
Select if only logs with the corresponding identification code are to be displayed, then enter the identification code.
rDate & Time
Filters logs by output date and time.
“Specify Start Date & Time”
When this item is selected and a date and time is entered, logs generated after the specified start date and time are displayed.
“Specify End Date & Time”
When this item is selected and a date and time is entered, logs generated before the specified end date and time are displayed.
Using the
Picture Recor ding Function
