Setting Camera Control, Image Size and Quality (Camera and Video)
3“Home Position”
This is the specified camera settings. When this is specified, the camera settings return to the specified settings if there is no request for control privileges.
“Zoom”
Sets the value for the camera’s angle of zoom.
“Brightness”
Sets the target value for the camera’s auto exposure feature. Select “Brighter” if the picture is too dark due to backlight or other factors.
“Return to Home Position when nobody has a control privilege”
The camera is returned to the specified settings if there is no request for control privileges.
4“Apply View Restriction”
If you check the “Apply View Restriction” option, the settings below are enabled. Use this
setting to prevent clients from seeing certain camera zoom positions. Using the VB Administration Tools is a convenient way to set the view restrictions (→
“Telephoto, Wide-angle”
Sets the zoom angles provided to users. (Specify settings so that the telephoto setting is less than or equal to the
5“Wide Converter”
When you have attached a wide converter to the camera, be sure to select “Used”.
Camera Names
1
1“Camera Name”
Used in the camera selection box on the viewers (→
