Emerson IS-WEB485ADPT installation manual Change Username / Password, Factory default passwords

Network Settings

5.7Change Username / Password

The Web card is designed for two types of access, each with a default user name and password. For security, be sure to change the default password.

Table 15 Factory default passwords

Type of User	Factory Default		Description
Administrator	Username	Liebert	Full access to configuration and control
	Password	Liebert	functions, as well as viewing privileges
General User	Username	User	Viewing privileges only—no access to
	Password	User	configuration or control functions

Follow these guidelines to change the user name and password.

Table 16 Username and password guidelines

Maximum length	32 characters (6 or more characters recommended)
Valid characters	Any printable character EXCEPT colon, tab, double quote, question mark
Upper/lowercase	Case-sensitive—letters must be uppercase or lowercase as entered
Tips	Avoid common names, words and phrases as passwords

Terminal Emulation (Serial or TCP/IP Connection) / Telnet

To change the Administrator or General user name or password:

1.Choose IP Network Settings from the Main Menu, then choose either:

•Change Administrator Username/Password or

•Change General Username/Password

2.Enter a user name—the current user name is shown in brackets.

Enter Administrator Username, press enter for [Liebert]: (Max 32 chars) ?>

3. Enter a password, then verify by typing the password again.

Enter New Password: (Max 32 chars) ?> ********

Verify Password: ?> ********

Web Interface

To access usernames and passwords through the Web interface:

•Click on the Configure tab, then Users in the left panel and finally Edit in the right panel. After making changes, click Save.

Configure tab

Edit

Users

26