Network Settings
Web Interface
To access the DNS menu through the Web interface:
•Click on the Configure tab, then Network Settings in the left panel and finally Edit beneath the table of parameters and descriptions. After making changes, click Save.
Configure tab
Network 
Settings
Click Edit to change settings
5.3Management Protocol
The Management Protocol Menu allows you to enable or disable SNMP and configure management protocols. Consult your network administrator for these settings.
Obtain address automatically
Specify address
Options for how long card retains resolved addresses
Management Protocol Menu
1: | SNMP | Agent | enabled |
2: | SNMP | Communications |
|
<ESC>: Cancel menu level Please select a key ?>
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To change any parameter:
1.Choose IP Network Settings from the Main Menu, then Management Protocol.
2.Select an option to change, then use the following guide to make changes.
Table 11 Management protocol ranges
Parameter | Description & Telnet Menus |
|
|
| ||
|
|
|
|
|
|
|
SNMP Agent | Enable or disable SNMP for remote management. |
|
|
|
| |
Enable SNMP Agent? [y/n] ?> |
| |||||
|
|
| ||||
|
|
|
|
|
|
|
| Set up access privileges, configure the |
|
|
|
| |
| SNMP Communications Menu |
|
|
| ||
| Web card to send traps, described in the |
|
|
| ||
| next section, SNMP Communications | 1: Authentication Traps |
| 'no' |
| |
| 2: |
| 'enabled' |
| ||
| Menu. |
|
| |||
| 3: - Traps |
| 'enabled' |
| ||
SNMP | For details on viewing support information, | 4: Liebert Global Products MIB | 'enabled' |
| ||
5: - Condition Traps |
| 'enabled' |
| |||
see 9.2 - Events and Parameters. | 6: - System Notify Tra | p | 'enabled' |
| ||
Communications |
| |||||
|
| |||||
| 7: Heartbeat Trap Interval’’ |
|
|
| ||
|
| 8: Display/Modify Communities |
|
|
| |
|
| 9: Display/Modify Trap Communities |
| |||
|
| A: Support Information |
|
|
| |
|
| <ESC>: Cancel menu level |
|
|
| |
|
| Please select a key ?> 1 |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
15
