Configuration Overview
3.3
Open the Terminal Emulation Interface - TCP/IP Connection
To access configuration using terminal emulation software with an Ethernet connection to the Web card:
1.Open a terminal emulation application, such as HyperTerminal.
To do this:
•Click the Start button, then Programs, Accessories, Communications and finally HyperTerminal.
2.In the Connection Description window, enter a name for the
3.In the Connect To window:
•Choose TCP/IP (Winsock) from the Connect Using
•Enter the IP address or hostname of the Web
Name
TCP/IP
(Winsock)
4.When the message at right appears in the HyperTerminal window, press the Enter key.
5.Enter the Administrator username and password (both are case- sensitive):
a.Login
b.Password (default is Liebert)
NOTE
RTCS v2.96.00 Telnet server
Service Port Manager Active <Esc> Ends Session
Login: Liebert
Password: ********
For security, change the default username and password (see 5.7 - Change Username / Password).
6.In the Main Menu, enter the number that corresponds to your choice. Refer to 3.1 - Guide to Configuration for details on each function.
7.After making changes, return to the Main Menu and choose Exit and Save to reboot the Web card and put your changes into effect (see 3.6 - Saving Changes and Reinitializing the Web Card).
Main Menu
1:System Information
2:IP Network Settings
3:Messaging
4:Factory Settings
5:Firmware Updates
q:Quit and abort changes
x:Exit and save
Please select a key ?>
8
