Monitor and Control Functions - Web Only
8.2Controlling Liebert Equipment
To perform Control operations through the Web interface:
•Open the Web interface (if needed, see 3.5 - Open the Web Interface).
•Click on the Control tab, as shown in the following example.
Control tab
Control Operations 
Click to view in right panel
•Control Operations categories appear at bottom left, organized with folder icons and showing the available Control functions. Clicking on a category changes the view in the right panel. The example above shows the summary page.
The following guide is a partial list of Control
Table 23 Control operations
Command | Description |
|
|
Abort Commands | Prevent any pending commands from being completed. |
|
|
Alarm Silence / Alarms | Temporarily silence an audible alarm that is active. Reset or acknowledge alarms |
|
|
Output / System | Turn the Liebert unit On or Off; reboot the unit. |
|
|
Statistics | Reset |
|
|
Tests | Initiate diagnostic tests on the Liebert unit. |
|
|
Setpoints | Change setpoints for the Liebert unit. |
|
|
•To perform an operation, click on a Control Operations category at left, then click on the appropri- ate button in the right panel. The example below shows control operations for two Liebert units.
Liebert GXT2U example
Output 
Liebert
DS example
Setpoints 
37
