Emerson IS-WEB485ADPT installation manual Telnet Server, Time Sntp Menu, Configure tab Edit Telnet

Network Settings

5.5Telnet Server

Use the Telnet Server Menu to enable or disable access to the Web card through a Telnet interface.

Terminal Emulation (Serial or TCP/IP Connection) / Telnet

Telnet Server Menu
-------------------
1: Telnet Server	'enabled'

<ESC>: Cancel menu level Please select a key ?>

To change this setting:

1.Choose IP Network Settings from the Main Menu, then Telnet Server.

2.Choose Telnet Server, then specify:

•Enabled to permit Telnet access

•Disabled to block access via Telnet

Web Interface

To access Telnet settings through the Web interface:

•Click on the Configure tab, then Telnet in the left panel and finally Edit in the right panel. After making changes, click Save.

Configure tab

Edit

Telnet

5.6Time (SNTP) Menu

This permits setting time options—how often the Web card synchronizes with the Time Server, which Time Server to use for synchronization and which the Time Zone the Web card is operating in.

Time Server Menu
-------------------
1: SNTP Time Sync Rate	Hourly
2: Time Server	time.nist.gov
3: Time Zone	(GMT) UTC
<ESC>: Cancel menu level
Please select a key ?>

24