System Information
4.0SYSTEM INFORMATION
System Information is optional and identifies the Liebert unit, its location, a contact person and other information about the unit. The default value of each field is “Uninitialized.”
NOTE
This information also configures the SNMP parameters sysName, sysContact, sysDescr, and sysLocation available using
System Information Menu
1: Name | Uninitialized |
2: Contact | Uninitialized |
3: Location | Uninitialized |
4: Description | Uninitialized |
<ESC>: Cancel menu level Please select a key ?>
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To edit any field in this category:
1.From the Main Menu, choose System Information.
2.Enter the number that corresponds to your choice, then enter the identifying information, using the following as a guide.
Table 7 | System information identifiers |
| ||
|
|
|
| |
Item |
| Description | Maximum Length | |
|
|
|
| |
Name |
| A name for the Liebert unit | 255 characters* | |
|
|
|
| |
Contact |
| A contact person or department responsible | 64 characters* | |
| for maintenance and operation of the Liebert unit | |||
|
|
| ||
Location |
| The location of the Liebert unit | 64 characters* | |
|
|
|
| |
Description | Other useful information about the unit | 64 characters* | ||
for quick reference | ||||
|
|
| ||
* Valid characters include spaces and other printable characters except double quotes (").
Web Interface
To access System Information through the Web interface:
•Click on the Configure tab, then Agent Info in the left panel and finally Edit in the right panel. After making changes, click Save.
Configure tab
Agent
Info
Edit 
11
