Emerson IS-WEB485ADPT installation manual Snmp Communications Menu, Display/Modify Communities

Network Settings

SNMP Communications Menu

Use the SNMP Communications Menu to enable authentication traps and view or change communi- ties and trap communities, events and parameters. For details on viewing support information, see 9.2 - Events and Parameters.

Table 12 SNMP communications menu

Parameter	Description & Telnet Menus
Authentication Traps	Enables authentication traps to receive security alerts when the Web card detects
	a request with an invalid community string.
	Enables the RFC-1628 (UPS specific information) MIB on the Web card for
RFC-1628 (UPS) MIB	querying of information in that MIB. This can be enabled or disabled independently
	of the Liebert Global Products MIB.
Traps	This option enables the RFC-1628 traps to be sent when an alarm event occurs on
	the device. The parent option must be enabled for this to also be enabled.
	Enables the Liebert Global Products MIB (Enterprise Specific) for querying of
Liebert Global Products MIB	information in that MIB. This option can be enabled or disabled independently of
	the RFC-1628 MIB.
Condition Traps	Enables event condition traps to be sent per the LGP MIB. The parent option must
	be enabled for this to also be enabled.
System Notify Trap Enabled	Enables system traps to be sent per the LGP MIB. The parent option must be also
	enabled for this to be enabled.
Heartbeat Trap Interval	Specifies how often a heartbeat trap will be sent to show that the device is online
	and functioning normally.

Display/Modify Communities

View devices that have permission to access the Web card, identified by IP address or hostname, read/ write permission and community string. Up to 20 devices may be configured for access.

		Communities - Example
	-------------------------
	1:		10.0.0.5			write		public1
		2:		10.0.0.6		write		public1
	Entry			IP	Access		Community
Codes for	#		address		(read/write)			string
		<a>dd		<d>elete	<e>dit
editing		Complex lines allowed. e.g. <a 198.1.1.1 write public> ?>

Each device is identified by:

•Entry Number - use the entry number (1-20) to edit or delete an entry

•IP address or Hostname - the address of the device with access (MultiLink server, Nform server, Network Management System)

•Access (read/write) - read allows users to view but not change data; write allows full permission for configuration, control and viewing

•Community string - the community string used by the IP host for this Entry Number (case-sensitive, up to 32 characters)

To make changes:

Add a device (see example at right to enter all parameters in one line):	Example
• Enter a to add an entry, then press Enter.	a 10.0.0.5 write public1
• Enter the IP address or hostname of the device to be added, then press	(then press Enter)
Enter.

•Enter 1 for read or 2 for write access for this device, then press Enter.

•Enter the community string, then press Enter.

17