Cabletron Systems Ethernet Hubs manual Port Configuration View Field Definitions

		Port Performance View
		IRM2, IRM3, IRBM, and MiniMMAC Hubs
	the Configuration View chapter, provides the information contained in the
	Error Source Table.
Table 6-7.	Port Configuration View Field Definitions
	Field	Definition
	Model Name	The user-defined or default name of the model.
	Network Address	The network IP address (e.g., 134.141.256.145).
	MIM/Port Number	The MIM number and the port number, in this format: 1.1
		(MIM/slot 1, Port 1).
	Port Media Type	The type of cables that can be connected to this port.
	Port Topology Type	The topological type of the port (Station or Trunk).
	Port Status	The network state of this port.
	Port Admin Status	The administrative state of this port (Off or On).
	Port Link Status	The state of the link signal for this port.
Table 6-8.	Port Configure Alarms View Field Definitions
	Field	Definition
	Model Name	The user-defined or default name of the model.
	Network Address	The network IP address (e.g., 132.177.118.24).
	MIM/Port Number	The board number and port number in the format: 1.1 (MIM
		or slot 1, port 1).
	Traffic Alarms	Enables or disables the sending of port level traps for this
		port.
	Traffic Threshold	Permits a port to be disabled on a traffic threshold alarm
	Alarm	(Not available for MiniMMAC and IRBM).
	Traffic Threshold	The threshold of packets within the Device Time Base that
		will cause a traffic alarm.
	Collisions Alarms	Enables or disables the sending of port-level collision
		alarms.
	Collisions	Permits a port to be disabled on a collision threshold alarm
	Threshold Alarm	(Not available for MiniMMAC and IRBM).
	Collisions Threshold	The number of collisions per good packet measured by the
		port that will generate an alarm.
	Error Alarms	Enables or disables the sending of port-level error alarms.
	Error Threshold	Permits a port to be disabled on an error threshold alarm
	Alarm	(Not available for MiniMMAC and IRBM).

9030367 E7	Performance Views
	6-15