Diagnostic View Description

SIRM Hub

Table entries within views provide double-click zones, which navigate you to device-specific Information Views.

SIRM Hub

The Cabletron SIRM MMAC Diagnostic View provides the following information:

Model Name

The user-defined or default name of the model.

Device Name

The ASCII name of the device read from the device firmware.

Network Address

The network IP address (e.g., 132.177.118.24).

Total

The total number of collisions counted since the device was powered on.

Last Poll

The number of collisions counted since the last poll.

Total Collisions

This button displays a graph showing SIRM MMAC Hub Collisions. The graph has a scroll bar that allows you to view the history of the hub collision statistics. The bottom axis of the graph shows the time in seconds broken into five minute intervals. The right axis shows the rate of collisions that occurred in the last polling interval. There is also a small box on the graph that shows the rate of collisions counted during that last polling interval.

Events

This button allows you to access the Event Log containing a list of network events specific to the hub. You can scroll through the Event Log using the menu or the scroll bars.

Alarms

This button allows you to access the IRM MMAC Alarms View. The Alarms View displays a list of current network alarms. For information on how to use the Alarms View, refer to the SPECTRUM Operator’s Reference.

9030367 E7

Diagnostic Views

 

5-3

Page 86
Image 86
Cabletron Systems Ethernet Hubs manual Sirm Hub