Application View Description
Application Views Cabletron Ethernet Hubs
3-2 Management Module Guide
Figure 3-1. Accessing the Application View
Application View Description
The Application View presents protocol related performance and error
statistics for a device. Protocols covered include TCP/IP, ICMP, and UDP. The
Application View also gives you access to firmware attribute information for
the Cabletron hub device. If the hub device is connected to other devices, you
can access additional attribute information for the connected devices through
the Application View HASPART Panel. The following sections describe the
Application Views for each Cabletron Ethernet hub.
The Application Views for Cabletron Ethernet hubs are similar. There are
only two differences:
• The IRBM Hub Application View provides an extra button (the Bridge
Databases button), which presents bridging statistics on the IRBM hub.
Double-click
Select Application
Close
Navigate
Alarms
Performance
Notes...
Utilities
Zoom
Configuration
Diagnostic
Acknowledge
Flash Green Enabled
Application
Device
DevTop