Cabletron Ethernet Hub Alarms and Events
Event and Alarm Messages Cabletron Ethernet Hubs
7-8 Management Module Guide
00010621
User defined broadcast
threshold, {v} broadcast packets
within {v} seconds, exceeded on
the board in slot {v} of {v}
(name - {v}).
00010621
Board Broadcast Threshold
Exceeded
This trap will be generated when
the broadcast (packets per time
interval) has been exceeded for
the given board.
00010622
User defined broadcast
threshold, {v} broadcast packets
within {v} seconds, exceeded on
port {v} of the board in slot
{v} of {v} (name - {v}).
00010622
Port Broadcast Threshold
Exceeded
This trap will be generated when
the broadcast (packets per time
interval) has been exceeded for
the given port.
00010625
Network configuration changes
reported by {v} (name - {v}).
{v} (name - {v} status is now
{v} (Instance ID {v}).
00010625
Not Applicable.
00010626
Device configuration change
reported by {v} (name - {v}).
Acquired database of {v} (name -
{v}) is full.
00010626
Not Applicable.
00010639
Environment Temperature Warm
condition at slot {I 1}
(Instance ID {0 2}) has been
detected by {v} (name - {v}).
00010639
This device detects that the
temperature within the device
has reached a WARM condition.
0001063a
ENVIRONMENT TEMPERATURE HOT
condition at slot {I 1}
(Instance ID {0 2}), has been
detected by {v} (name - {v}).
0001063a
This device detects that the
temperature within the device
has reached a HOT condition.
0001063b
Environment Voltage Low
condition has been detected by
power supply in slot {I 1}
(Instance ID {0 2}) of {v} (name
- {v}).
0001063b
The device detects that its
power supply voltage is low.
Table 7-1. Events and Alarms (Continued)
Event Message Probable Cause Message