Precautions
Installation
■The copier should not be installed in areas with the following conditions:
C Extremely high or low temperature and humidity.
Proper ambient conditions
Temperature: 50°F – 90°F
Relative humidity: 30% – 80%
CWhere temperature and humidity can change rapidly, causing condensation.
CDirect exposure to sunlight.
CDirectly in air conditioning flow.
CIn areas of high dust concentration.
CIn areas of poor ventilation.
C In areas with chemical fume concentration.
CIn areas with extreme vibration.
C With unstable or uneven conditions (floors, etc.).
■The power consumption is 1.0 kW.
A properly wired (with ground), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord.
The main plug on this equipment must be used to disconnect main power. Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.
Any unauthorized changes or modifications to this equipment would void the users authority to operate this device.
8
