Logical MIM Representation
Device Views Cabletron Ethernet Hubs
2-8 Management Module Guide
This button allows you to change the statistics represented in the horizontal
gauges for the entire MMAC. When you single-click on the Logical Gauges
button, a menu appears. The horizontal bar gauge changes color depending on
the statistic being represented. The following table provides a list of the menu
options and their corresponding gauge color definitions.
The Gauge Mode button allows you to change the gauge representation of the
selected statistic. Refer to Table 4-2 for the statistic gauge representations.
Logical MIM Representation
The logical MIM representation provides information about the individual
modules. For information on the Device View physical MIM representation,
see the section titled “Physical MIM Representation.”
The logical MIM representation provides port status labels and double-click
zones that provide access to information on each module installed in the hub.
The logical MIM representation also provides several double-click zones that
function as follows:
Port Number
Indicates the port number. You can double-click on the port number to bring
up a notes window.
Port Status
Indicates the status of the port. You can double-click on this zone to bring up
the Port Performance view, which is described in Chapter 6. When you have
accessed the Logical MIM representation through the Physical MIM
representation, double-clicking the Port Status Label opens the Port
Administration Status dialog box. If you have write privileges, you can double-
click on this zone to change the port administration status from ON to OFF or
from OFF to ON. Table 2-3 provides the port status values.
Logical Gauges
Menu Option Gauge Color Definition
Frame Light blue Indicates the number of frames received or
transmitted by the module or port.
Collisions Yellow Indicates the total number of collisions
detected by the module or port.
Gauge Mode